EN
The device can be switched off at any
time by pressing the general on/off
touch key
(1). In standby mode an
H will appear in the zones that are hot.
The rest of the displays will not light up.
Double burner hot plate
If your cooker has this option, the
double burner hot plate offers the
possibility of using the inside ring or
also, in addition, the outside one,
depending on the size of the pot or
pan.
SWITCHING ON THE DOUBLE
HOT PLATE
1 The related hot plate must be
selected.
2 Select the desired power (from 1
to 9) using the touch key
(4/5).
3 Press the double hot plate touch
key
(6) to activate the double
burner. When the double zone will
be activated, double zone indicator
(8) light on.
SWITCHING OFF THE DOUBLE
HOT PLATE
1 The key, by which its double burner
hot plate was switced on previously
is selected.
2
Press the double hot plate touch
key
(6)
to deactivate the double
burner. The double burner indicator
(8) will light off and the outer ring will
be deactivated
Locking of the touch keys
of the cooking hob
To prevent undesired manipulation
you can lock the entire unit, except
for the on/off touch key, using the
locking touch key
(7). This function
is useful for child safety. When the lock
is activated, the lock indicator light (9)
comes on.
However, remember when the touch
control is on, the on/off touch key
(1)allows you to switch it off, even if
36
the lock is activated (the lock indicator
light (9) on).
On the other hand, if the touch control
is switched off, the locking function
does not allow the on/off touch key
(1) to be used.
To deactivate the locking function,
press the locking touch key
once again. Lock indicator (9) light off
and touch control will be ready for use.
CHILD LOCK
The child lock is different and more
complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence.
The Child Lock is being used to
prevent children from turning on
the hob.
Activating Child Lock :
or
1. The hob is switched on via
On/Off touch key,
2. Any zone should not be selected.
When any zone is not selected,
(5) Increase power touch key and
(4) decrease power touch key
and minus sensors is hold for 3
seconds at same time. At the end
of this period, a short buzzer sound
is heard
3. After buzzer signal , the
locking touch key is touched (there
is no need to keep press for a long
time) and a long buzzer sound is
heard and the Child Lock will be
activated and all power display
shows "L".
During Child Lock, if user touch any
sensor (Main sensor included) , "L"
will flash on display.
Warning : Child lock status is not
being stored. If the energy of the hob
is butted, child lock status could not
be preserved.
Deactivating Child Lock :
To be able to deactivate Child Lock,
the Child Lock should be activated
before and all power display show "L"
1.
(5) Increase power touch key
and
(4) decrease power touch
key and minus sensors is hold for
3 seconds at same time. At the end
of the this period, a short buzzer
sound is heard,
2. After buzzer signal , is touched to
the
(7) locking touch key (there
is no need to keep press for a long
time) and a long buzzer sound is
heard and the Child Lock will be
(7)
de activated and "Indication will
be light off.
Flash Cooking
(Automatic cook start)
This function facilitates cooking as
you do not need to be present while
it is being done. The touch control
pre-programmes the chosen hot
plate at the maximum power and
subsequently lowers it to the desired
power level (which you have selected)
after an approximate amount of time
(1)
(see table 1).
Table 1
Automatic Cook Start
Selected
power
0
1
2
3
4
(7)
5
6
7
8
9
SWITCHING THE AUTOMATIC
COOK START FUNCTION ON
1 The hot plate must be selected.
2 Select power 9 and then press
power touch key
the touch key you must lower the
continuous cooking power to the
desired level, (for example 6).
When the automatic cook function
starts "A" indication flashes with
desired power level on the display.
SWITCHING THE AUTOMATIC
COOK START FUNCTION OFF
Function
0
60
180
288
390
510
150
210
270
-
(5).After using