Congratulations on your purchase of a Champion Power
Equipment (CPE) home standby generator. This generator is
designed and engineered in the USA to exacting standards of the
North American market. This engine-powered generator meets
all Environmental Protection Agency (EPA) Phase 3 requirements
and is approved by
ETL
as tested to UL2200 and CSA22.2 No.
C
US
100 in both the USA and Canada.
With proper use and maintenance, this generator will provide
years of satisfying service.
The Champion Staff,
Champion Power Equipment
12039 Smith Ave.
Santa Fe Springs, CA 90670
Toll-free: 1-877-338-0999
Mon-Fri 8:30 AM – 5:00 PM (PST/PDT)
www.championpowerequipment.com
tech@championpowerequipment.com
HOME STANDBY GENERATOR
This home standby generator is intended exclusively for outdoor
installation. This generator will operate using either liquefied
petroleum gas (LPG, Propane) or natural gas (NG).
This generator is designed to supply typical home load such as:
•
Induction motors – sump pumps, refrigerators, air
conditioners, furnaces
•
Electronic items – televisions, computers
•
Household lighting
•
Microwaves
•
This generator is not intended for use in critical life
support applications.
Proper sizing of the generator is required to ensure proper
operation of appliances. Some appliances require additional
wattage to start and must be considered.
© 2015 Champion Power Equipment
INTRODUCTION
PARTS INCLUDED
Your HSB ships with the following:
•
Operators Manual
•
Installation Manual
•
Oil Drain Pan
•
Flexible Fuel Line
•
HSB Enclosure Keys
•
Battery Cable Connection
•
LPG Low-speed and Main Converting Jets
•
Jet Change Tool
•
Lock Nut M6, Flange
•
Washer, Ø6
•
Flange bolt, M6 x 20
Model 100199
Part No. 101049 Rev. B
5