CARE AND CLEANING
• To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only.
• Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature deterioration of the
finish. This is not a defect in the finish and will not be covered by the warranty.
• Do not spray the light fixture with a hose or power washer.
SPECIFICATIONS
Motion Sensing Range .........................Up to 50 ft. (15.2 m) [varies with surrounding temperature].
Motion Sensing Angle .........................Up to 270°
Camera Viewing Angle ........................110°
Power Requirements .............................120 VAC, 60 Hz
Electrical load – LED...........................35 Watts
Offline Operating Modes .....................TEST and MOTION ACTIVATED
ON-Timer ............................................1, 5, 20 minutes (Night Only)
Test Timer ............................................5 Seconds (Day and Night)
Sensitivity ............................................."Low", "Medium", "High"
LED Lumens .......................................2000
LED color temperature ........................3000K
7
210509-01
To see operational and troubleshooting information and videos,
go to www.hzsupport.com