Internal Access - SSCOR Quickdraw 2403 Serie Instrucciones De Operación Y Mantención

Internal Access

WARNING DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT IF YOU ARE NOT A BIOMEDICAL
TECHNICIAN. NO MODIFICATION OF THE EQUIPMENT IS ALLOWED. UNAUTHORIZED SERVICE
ATTEMPTS, OPENING OR TAMPERING WITH THE COMPONENTS OF THE SSCOR QUICKDRAW CAN
DAMAGE OR DISABLE THE DEVICE, AND WILL VOID THE WARRANTY.
Remove the five 4-40 screws using a
Phillips head screwdriver and lift off the chassis
(A) Vacuum Pump: Do not attempt to service
(B) PC Board (behind the pump) –
Electrical Circuits; Do not attempt to service.
(C) Battery - 12V DC nominal voltage
(D) Battery door
(E) Pump connection to PC Board
(F) Vacuum Barb and O-Ring
To Replace Battery:
1. Open battery door and remove the depleted battery
2. Install a new battery as shown.
3. Make sure the contacts on the battery mate to the
terminals on the chassis.
4. Close the battery door and turn the unit on to verify
performance.
8
Quickdraw - Model 2403 Series
Rev. E