Du Pont QuickTwist WFQTR13000 Serie Guia De Inicio Rapido página 6

QuickTwist ® Filter Replacement
1
Turn off the cold water shut-off valve to the Filter System
2 B
Turn the QuickTwist ® Filter from right to left until it releases. Gently pull down on the used QuickTwist
the System Head. Discard the used QuickTwist
NOTE: Place a pan or bucket under the Filter System to catch any water drips.
3
®
Hold the new QuickTwist Filter with the label facing to the left slightly. The two nozzles on top of the QuickTwist
be toward the back of the QuickTwist
should be out to each side.
4
®
Lift the QuickTwist Filter straight up into the System Head until the two nozzles seat into the ports and the two extended
flanges on top of the QuickTwist
5
Turn the QuickTwist ® Filter from left to right until it stops.
6
Turn on the cold water shut-off valve and the Faucet for Filtered Water
the troubleshooting information in Step 6 of the Installation Instructions.
7
Flush water through the Faucet for Filtered Water for approximately 10 minutes to flush out any air from the QuickTwist
Check for leaks once more before completion.
WFQTR130004
X
A
.
®
Filter.
® Filter. If holding properly, the two extended flanges on top of the QuickTwist
® Filter are fully engaged into the System Head.
D
® Filter to remove it from
®
Filter should
®
and check for any leaks. If there are leaks, refer to
6
2
A
Filter
B
® Filter.
3
5
A
B
V4.1C