Cleaning And Maintenance - universalblue UVT1323-21 Manual De Instrucciones

In order to be able to use the ceiling fan through the remote control, the
receptor included with this device must be installed before, as explained in the
installation section of this manual.
To use the remote control, you must add 2 batteries to the bottom of the
remote.
Note: Each remote control is associated with the receiver included
with the fan.
Note: When you turn off the fan with the remote control, the last light
setting will be saved. For example, if the light was set in "warm"
position last time you used it, the next time you turn on the fan via
the remote control the light will be in the same setting. If you turn on the fan
via your room's switch installation, the settings will be saved too.
WINTER FUNCTION
This option involves reversing the blades to distribute the hot air that
accumulates against the ceiling, allowing continued use of your fan
throughout the year.
To use this function simply press the remote control button.

5. CLEANING AND MAINTENANCE

This product does not require a great deal of maintenance. To clean, please
follow the instructions below:
Unplug the fan first and wait until it comes to a complete stop.
•
Before cleaning, turn the unit off, cut off the power supply from
•
electrical outlet and wait for the unit to cool down.
•
To clean the unit, use a soft cloth to wipe off any dust..
Do not use abrasive cleaners.
•
Do not try to open the unit without a licensed electrician. Improperly
•
installed the unit can be dangerous.
Clean the unit at least once a year.
•
If you are not going to use the fan for some time, it is recommended
•
to remove the batteries from the remote control and store it in a clean
and dry place.
38