Introduction; Safety - Skymsen CSE Manual De Instrucciones

1. Introduction

1.1 Safety

When incorrectly used this equipment is a potentially DANGEROUS machine.
Before using this equipment, read this Instructions Manual carefully and keep it accessible
for future consulting.
To avoid accidents, injure or damages to the equipment, respect the following instructions:
1.1.1 In order to avoid the risk of electric shocks and damage to the machine, never operate
it wearing wet clothes or shoes, install the equipment on a wet or humid surface nor dip it
in water or any other liquid, and do not spray water directly on it.
1.1.2 The use of the equipment must be always supervised specially when used next to
children.
1.1.3 Before cleaning and when not in use or before inserting or removing accessories,
maintenance, or other services, disconnect machine from power source.
1.1.4 Do not use the equipment if the cord or the plug is damaged. Do not leave the electric
cable on the edge of the table or counter nor let it touch hot surfaces.
1.1.5 Do not use the equipment if it is not working correctly, nor if it has been damaged in
any way. In case that happens, take the equipment to the nearest Technical Assistance to
check it up.
1.1.6 The use of accessories not recommended by the manufacturer may cause personal
hurt.
1.1.7 Keep your hands or any tool away from the moving parts.
1.1.8 During operation, never wear loose clothes with wide sleeves principally around the
wrists.
1.1.9 Make sure the equipment voltage is the same as the network voltage and that the
equipment is duly grounded.
1.1.10 Do not use the equipment outdoors.
1.1.11 Do not leave your equipment working without supervision.
3