MAAX Utile Guia De Instalacion página 12

2
Installing the base (cont'd)
STEP
Distinct / Zone Square
With a 1/8" drill bit, drill holes in the base flange then
secure the base to all the wall studs with #8 x 1¾"
flat-head screws (not included). Pre-drill the flange
only and not the studs.
HAND TIGHTEN ONLY!
THE BOTTOM OF ALL HOLES IN THE FLANGE
MUST BE AT LEAST 8MM (3/8") ABOVE THE BASE
THRESHOLD! HOLES MUST BE FILLED WITH
SILICONE BEFORE SCREWING
CUT THE EXCESS PART OF SHIMS
Distinct 48 drain cover installation
Insert the drain cover (13a) as shown.
All manuals and user guides at all-guides.com
2.7
Check me!
3/8" (8 mm)
2.8
Check me!
12
Ø 1/8"
Tiling flange
13a
13