Temporary Installation Of Side Wall - MAAX Utile Guia De Instalacion

5
Temporary installation of the side wall
STEP
Measure the distance between the front face of the back
wall (14) and the center of the faucet. Then measure the
distance from the top of the base threshold to the center
of the faucet.
Using those two measurements mark the position of the
faucet hole on the remaining side wall. Measure from the
side and bottom of the side wall.
Repeat this process for all required faucet holes.
Measure twice, drill once !
Record measures below.
Drill a hole from front for the faucets at the previously
marked positions. Pre-drill the hole with the ⅛'' drill bit.
The hole saw size is determined by the faucet type; refer
to the faucet installation manual for hole saw size.

Hole saws can be rented at your
Quick tip local hardware store or any tool
rental location.
For safe hole saw usage always
pre-drill a hole and wear safety
glasses when drilling.
All manuals and user guides at all-guides.com
Check me!
Check me!
Check me!
15
5.1
Faucet
center
5.2
Base
threshold
Front cut
view
5.3
Back
Top view
wall