Hold-Down Brackets; Extension Brackets; Spacer Blocks - Levolor Natural Shades Instalación

HOLD-DOWN BRACKETS (optional)
NOTE: Some styles may have the hold-down pins built into the bottom rail.
•
Tap the hold down pin into the center hole on the bottom rail.
•
Attach the hold-down brackets at the bottom of the window with the included
screws, as shown for your installation type.
•
Slip the hold-down pin into the hole in the bracket.
Hold Down Pin Orificio central
Inside Mount
EXTENSION BRACKETS (optional)
•
Optional extension brackets offers clearance for obstructions.
•
Outside mounting extension brackets will provide 1–3" clearance between the
headrail and mounting surface. Assemble extension bracket as shown.
SPACER BLOCKS (optional)
•
Outside mounting spacer blocks will provide an additional
•
If spacers are used, longer screws may be required to ensure a secure installation
(not provided).
!
CAUTION: Do not use more than one spacer block. Using more than one
spacer block could cause shade to fall resulting in possible injury.
INSTALLING ADDITIONAL COMPONENTS
Hold Down Pin
Inside Mount
Outside Mount
Orificio central
Outside Mount
⁄ " clearance as shown.
3
8
Cordless Lift Control
15