Outside Mount - Levolor Roller Shades Fabric Instalación

OUTSIDE MOUNT (OM)
STEP 1: MARKING THE BRACKET LOCATIONS
IMPORTANT: The brackets must be flush against a
flat mounting surface. Do NOT mount brackets on
curved molding.
•
Center the shade over the window
opening at the desired height.
•
Mark screw locations for each
L bracket approximately 3" from
end of cassette, 2 holes per bracket.
— Use a level to ensure all
brackets are aligned.
•
If more than two installation brackets come with your order, space additional
bracket(s) evenly between the two end brackets, no more than 30" apart.
STEP 2: INSTALLING THE BRACKETS
•
Pre-drill screw holes using a
marks as a guide.
— If installing brackets into wood,
use supplied screws.
— If installing into drywall, use
anchors in combination
with supplied screws.
•
Screw in L brackets at marked
locations, 2 screws per bracket.
•
Ensure all L brackets are square
with each other.
•
Attach cassette mounting bracket to L bracket using screws and wingnuts.
— Make sure the release tab is always mounted on the bottom.
Bracket
Bracket
⁄ " drill bit, using pencil
1
16
Drywall
Anchors Drywall
Bracket
Anchor
Cordless Lift Control–Cassette Valance
INSTALLATION
Screw
Screw
Bracket
9