Product Function - Unilever UR5640 Manual Instrucción

EN

Product Function

This device is a direct-drinking water purifier, it adopts a RO-based (Reverse Osmosis Membrane Technology) multistage
filtration system. after installation, it only needs to be connected with the power supply to make purified water and flush
automatically, and shut off automatically once the water tank is full.
Instructions for Use
Under normal working condition, the Filter life indicator
light is always in blue. When the Filter life is about to
expire, the filter element life indicator light will flash in red
once in 2 seconds. After the Filter life expires, the Filter life
Filter life indicator light will flash in red once in 1 second
indicator light Blue light cycle display indicates that the machine is
performing the flushing product function
Red light cycle display indicates the machine is in water
purification protection, which needs to be re-power on again
after troubleshooting
It is used with the "
Reset button
to be reset, press and hold the reset button for 3 seconds to
reset the selected Filter
It is used with the "
touch and press the "
Select button
be reset, and the indicator light of the corresponding Filter
flashes
- 4 -
" button. After selecting the Filter
" button. After replacing the Filter,
" button to select the Filter to