Operation - Ryobi P420 Manual Del Operador

ATTACHING THE SIDE HANDLE
See Figure 2.
 Remove the battery pack from the grinder.
 Insert the side handle into the desired operating
position.
NOTE: The handle can be installed on the top, left, or right
side of the grinder, depending on operator preference. The
handle must always be used to prevent loss of control
and possible serious injury.
 Securely tighten by turning the side handle clockwise.
WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating products. Failure to do so could
result in objects being thrown into your eyes, resulting in
possible serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
All manuals and user guides at all-guides.com
ASSEMBLY

OPERATION

9
SIDE HANDLE
APPLICATIONS
You may use this product for the purposes listed below:
 Grinding metals
 Sanding wood or metal surfaces
This product will accept Ryobi One+ 18 V lithium-ion
battery packs and Ryobi One+ 18 V nickel-cadmium battery
packs.
For complete charging instructions, refer to the Operator's
Manual for the battery packs and chargers listed in the
General Safety Rules.
Fig. 2