Valance Returns - Levolor Natural Shades Instalación

INSTALLATION - ADDITIONAL COMPONENTS
VALANCE RETURNS (outside mount only)
WOOD VALANCE:
•
Insert the clips into the groove on the back side of the valance and then rotate the
clip 90°.
•
Insert return clips as far as they will go into each end of the valance.
•
Align the return clips with the slots on the headrail and slide into place.
CLASSIC VALANCE
Return clip
•
If your valance return has hook and loop strips only -
— Align the valance return with the end of the headrail, so that the hook-and-loop
strips are at the top.
— Firmly press the valance return into place so that the hook-and-loop strips
engage.
•
If your valance return has both hook-and-loop strips and plastic corners -
— Peel the backing from the plastic to expose the adhesive.
— Align the valance return with the end of the headrail, so that the hook-and-loop
strips are at the top.
Hook-and-loop strips
— Firmly press the valance return into place so that the hook-and-loop strips
engage and the plastic adheres to the back of the valance.
16
Corded Lift Control
Return clip
Valance
Hook-and-loop strips
Return clip
Valance return
Hook-and-loop strips
Valance return
Return clip
Return clip
Valance
Return clip
Valance