Levolor Natural Shades Instalación página 9

INSIDE MOUNT (IM) INSIDE MOUNT (IM)
STEP 1: MARKING THE BRACKET LOCATIONS
• Verify that your window casing has a minimum depth of 1 ½" which allows for
a partially recessed headrail mount. If flush mount (fully recessed mount) is
desired, a minimum mounting depth of 2" is required.
• Position the inside-mount brackets at each end of the headrail.
• Using the notches in the headrail as a guide for bracket placement, mark the
locations of the bracket, making sure they are square and evenly placed from the
window. Only two screws are needed per bracket and they should be placed in
bracket holes diagonally from each other.
Bracket
Bracket
INSTALLATION
Corded Lift Control
9