Setting A Password; Inhibiting Transmission - Midland CT3000 Manual De Instrucciones

Setting a password

It is possible to set a password that will be required at the turning on of the radio.
1. Access the menu and follow this path:
MENUFUNC MENUPWD
2. Now select the desired option:
• ON (everytime the radio is turned on a password will be required)
• OFF (no password required)
3. Select the option and confirm by pushing the main knob.
4. Press P3 to exit the menu and return in stand-by condition.
Note: The password set by default is "000000". The password can be changed
through the optional programming software.

Inhibiting transmission

In CT3000 the transmission can be inhibited: when this function is enabled,
the pressure of PTT won't have any effect.
1. Enter the radio menu and follow this path:
MENUCHAN MENUTX
2. Choose one of these options:
• Tx ON: to enable the transmission
• Tx OFF: to disable the transmission.
3. Select the desired mode and confirm by pushing the main knob.
4. Exit the menu and return to stand-by mode by pressing P3.
Note: The selected option can differ from frequency to channel mode and from
VFO A to VFO B.
Note1: when the transmission is inhibited, if you press the PTT the radio won't
transmit and will emit a warning tone. The display will show "FORBID TX".
Dual Watch function
This functions allows to monitor two channels at the same time.
1. Enter the radio menu and follow this procedure:
MENUFUNC MENURDW
Select ON and confirm by pushing the main knob.
2.
3. The dual watch function is activated and the radio will start monitoring
the two channels.
4. Everytime the radio detects a signal, the monitoring will stop and will re-
sume once the signal disappears.
Midland CT3000 instruction guide | 25