KTM POWERPARTS Guia Del Usuario página 4

2
3
4
4
Scope of delivery:
1x SXS factory exhaust
Preparations
- Remove the series main silencer and exhaust.
1
- Loosen the screws (1) of the silentblocks for the exhaust (2), front and
- Turn the range change metal nut (3) on the silentblock at the front (2) (ori-
5
Assembly
4
A
NOTE:
Do not tighten any screws yet.
- Attach the SXS factory exhaust and mount with the original screws M6x10 (4).
- Mount the original springs (5).
3
- Mount the main silencer.
- Align the entire system.
- Tighten the screws of the exhaust and main silencer.
- Tighten the screws (1) of the silentblocks for the exhaust (2), front and
rear.
entation, see Figure A).
rear.
SXS11200500