Before Installing The Product; Installation Precautions; Installation Tips - Pioneer VREC-170RS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 187

Before Installing the Product

WARNING
When installing the product on vehicles installed with an air bag, never install on the cover of the air bag and at locations
that might obstruct the deployment of the air bag. Doing so might prevent the air bag from being deployed normally, cause
the product to fly out due to air bag deployment, and cause accident and injury.
CAUTION
First check with the vehicle manufacturer for precautions related to the installation work when installing the product in a
vehicle equipped with airbags. Otherwise there is a risk of airbag malfunction.
Always use the included parts as specified. There is a risk of product failure if other parts are used.
Install this product in a location where it will not hinder vehicle equipment and the ability to drive the vehicle.

Installation Precautions

The main unit is for installation to the inside of the front window only. Do not install it anywhere else inside or outside of
the vehicle.
When installing the main unit to the inside of the front windscreen, be sure to install it to the specified positions of the front
windscreen and within the specified dimensions.
Make sure that the surface of the front windscreen is clean and dry, before attaching the mounting cradle.
Depending on the vehicle, installation at the specified location and within the specified dimensions may not be possible.
For details, consult with your dealer.
Do not cover the main unit or get the lens dirty.
Do not place reflective objects near the lens.
Take care when handling the main unit that it does not drop and you do not touch the lens.
Recording quality may be affected if the front windscreen of the vehicle is coated or has been specially treated.
This product may not be able to receive GPS signals if the front windscreen of the vehicle has been specially treated. Check
the GPS reception status indicator displayed on the screen of this product. If a GPS signal cannot be received, this product
cannot be installed in this vehicle. - " Using this product" - "How to View the Recording Screen"
Choose a working location free from dust and debris in the air.
When the temperature is low or there is condensation on the glass, turn on the heater and defroster to warm up the window
in order to prevent poor adhesion of the mounting cradle.
To avoid the windscreen mounted cradle from detaching, you may attach the safety strap (included in the box).
Always install this product in the specified installation position to ensure a safe field of view while driving and to achieve
full performance from the product.
Pioneer is not liable for any damage, due to installation or use of the product.

Installation Tips

Before Installing and Securing the Product
First, temporarily connect this product and confirm that it operates correctly, and then install it. If the product does not
operate correctly, check again if there is a mistake in the connection.
Before Applying Mounting Cradle
Clean the location where the mounting cradle will be applied.
CAUTION
Install firmly so that it does not come off. Incorrect installation may cause this to detach whilst driving and cause an
accident. Inspect the installation state from time to time.
− 14 −

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido