Video Recording; Event Recording - Pioneer VREC-170RS Manual Del Usuario

*1 When manual event recording is performed or vibration is detected in the event recording mode,
and event recording has been activated, the Event icon is displayed.
*2 A red "\" is displayed when sound recording is set to off.
*3 During a wireless connection, this is displayed in green, and when wireless connection is discon-
nected, this is displayed in white. A red "\" is displayed when wireless connection is set to off.
*4 During GPS reception, this is displayed in green, and when GPS cannot be received, this is dis-
played in white.

Video Recording

Recording automatically starts when this product is started. The recorded video is saved to the
microSD card as one file of the set increment of time (default: 3 minutes), and when the microSD card
runs out of free space, the files are overwritten starting from the oldest file.
Notes
• You can change the video recording time.
→
"This Product Settings" - "Configurable Features"
"Video Clip Length"
• Video recording will stop under the following circumstances.
— When the MENU screen is displayed
— When the power supply is stopped
— When parking mode has started
— When the microSD Card is removed
• The recording time may differ depending on the conditions.

Event Recording

Automatic Recording by Detecting Impacts (Event Recording)
The video recording file when an impact is detected by this product (the Dash Camera), such as an
impact with another vehicle, is recorded as an event video file to the "Event" folder.
The number of event video files and recording times will differ depending on when an impact is
detected. If an impact is detected, then the file records for 31 seconds after the impact is detected are
recorded as an Event video files.
Manual Recording (Manual Event Recording)
If manual record button is pressed during video recording, then this is recorded as an event video file
for 33 seconds, with the same specifications as an event recording.
Notes
• You can adjust the sensitivity for detecting impacts.
→
"This product Settings" - "Configurable Features" - "Recording Setting" - "G-Sensor
Sensitivity
-
"Recording Setting"-
− 23 −