Installation; Specified Installation Position On Front Windscreen - Pioneer VREC-170RS Manual Del Usuario

Installation

Specified Installation Position on Front Windscreen

When installing this product to the inside of the front windscreen, install in a vehicle
and in a position that satisfies all of the following conditions.
• A position where this entire product is within 20% of the top edge of the height of the front windscreen
(range within 20% of the actual length, excluding parts overlapping weather strips, mouldings,
etc. and masked parts) or is in the shadow of the rear view mirror as viewed from the driver's seat.
Note that "20%" as described above is a rough estimate. Please install the product in accordance with
your country's laws and regulations.
• A position where the lens part of this product is within the wiping range of the wiper.
• A position where the lens part of this product does not hang over the sunshade and black ceramic
lines/black ceramic pattern.
• A position where this product faces in the horizontal direction to the front and side to side.
• A position where the power cable can be routed without unnecessary force.
This product
* Install this product in a location
where it will not interfere with the
driver's field of view,such as behind
the rear view mirror.
Within 20% of Height
A Pillar
IMPORTANT
Always install this product in the specified installation position to ensure a safe field of view while driving
and to achieve full performance from the product.
Installation Angle
Forward Direction
of Vehicle
Front
Windscreen
Rear View Mirror
This product
Range of Windscreen Wipers
− 15 −
Installation Direction
Horizontal Direction
This product
Front Windscreen
This product
Horizontal Direction
A Pillar
Air Bag
Ground