Installation & Usage - Conceptronic CUPSOF600 Guía Rápida

English
Installing the New office UPS is as easy as following the steps shown. Be
aware
that the Power Switch must be kept in the "ON" position and all equipment
must be plugged into the Battery Power Supplied Receptacles, otherwise, the
UPS will be disabled and your equipment will not be protected during a power
failure.

Inspection
Remove the UPS from its packaging and inspect it for damage that may have
occurred during shipping. If any damage is discovered, repack the unit and
return it to the place of purchase.

Placement
Install the UPS unit in any protected environment that provides adequate
airflow around the unit, and is free from excessive dust, corrosive fumes and
conductive contaminants. Do not operate your UPS in an environment where
the ambient temperature or humidity is high.
3. Installation & usage