Installation & Usage - Conceptronic CUPS650 Guia De Inicio Rapido

English
Turn ON/OFF the UPS
Turn on the UPS: Press the UPS On/OFF Switch for approx. 3 seconds, then the
Buzzer sounds twice, the UPS will be start-up.
Turn off the UPS: Press the UPS On/OFF Switch for approx. 3 seconds, then the
Buzzer sounds twice, the UPS will be shutdown.

Inspection
Inspect the UPS upon receipt. Notify the carrier and dealer if there is
damage. The package is recyclable; save it for reuse or dispose of it
properly.

Placement
Install the UPS unit in any protected environment that provides adequate
airflow around the unit, and is free from excessive dust, corrosive fumes and
conductive contaminants. Do not operate your UPS in an environment where
the ambient temperature or humidity is high.
4. Installation & usage
1. AC input outlet
2. Fuse
3. Output receptacles
4. USB port
5. Modem/LAN Internet Protection
6. Fan (CUPS1200/CUPS2200)