Metabo HPT C 18DBAL Manual De Instrucciones página 20

English
Lock-off button
4. About the mode select function
Each time the mode selector switch is pushed, the
operation mode changes.
When Silent mode is selected, the Silent mode
indicator lamp lights up.
Silent mode reduces maximum motor RPM enabling
effi cient work with less noise.
If the load increases while the motor is operating in
Silent mode, it automatically changes to Power mode.
Additionally, if the load decreases again, it
automatically returns to Silent mode.
In Power mode, no change is made to Silent mode
even when the load decreases.
Mode
Power
Silent
NOTE
● The mode will only change after a battery is installed
and the switch is pulled once.
● The current mode will be maintained even if the switch
is on/off , or the battery is removed/reinserted.
5. About Remaining Battery Indicator
Remaining battery power can be verifi ed by pulling
on the switch to make the remaining battery indicator
lamp light up red. (Fig. 22)
The indicator lamp will change to the lighting mode
indicator lamp (green) 10 seconds after the switch is
released. The Table 6 shows the state of remaining
battery indicator lamp and the battery remaining
power.
20
Switch trigger
Fig. 22
No-load speed
4,100 /min
2,500 /min
State of lamp
As the remaining battery indicator shows somewhat
diff erently depending on ambient temperature and
battery characteristics, read it as a reference.
6. How to use the LED light
By pressing the lighting mode switch on the switch
panel, the LED light mode changes as Table 7. It is
indicated by green lamp. (Fig. 23)
Pulling the switch changes the indicator lamp to the
remaining battery indicator lamp (red).
To prevent the battery power consumption, turn off the
LED light frequently.
Lighting mode indicator lamp
Switch panel
LED Light
Table 6
Battery Remaining Power
The battery remaining power
is enough.
The battery remaining power
is a half.
The battery remaining power
is nearly empty.
Re-charge the battery
soonest possible.
Lighting
mode switch
Fig. 23