Troubleshooting; Environmental Protection; Declaration Of Conformity - Worx WX255 Manual Original

TROUBLE SHOOTING
Problem Possible cause
Battery will 1. Charger not
not charge plugged into a
working outlet.
2. Surrounding air
temperature is too
hot or too cold.
Switch cannot Forward/Reverse
be pressed switch at middle
position
20
Driver stops Driver battery is out
during driving of power
screws
Bit Cartridge The cover is not
will not rotate fully open
when Cover
slides.

ENVIRONMENTAL PROTECTION

Solution
1. Plug charger into
advice.
a working outlet.
Check current by
plugging in a lamp.

DECLARATION OF CONFORMITY

2. Move charger
to an appropriate
We,
place which tem-
Positec Germany GmbH
perature is suitable
Grüner Weg 10, 50825 Cologne, Germany
for the charger.
Declare that the product,
Make sure switch
Description
is on Forward or
Type WX255 WX255.1 WX255.2 (250~269 - designation
Reverse rotation
of machinery, representative of Battery-powered
according to proj- Screwdriver)
Function Tightening and loosening screws, nuts
ect need.
Make sure the driv-
Complies with the following directives,
er is fully charged 2006/42/EC
before using it. 2011/65/EU&(EU)2015/863
2014/30/EU
Make sure the
2014/35/EU
Cover is fully open
and past the red
Standards conform to:
EN 62841-1,
line on the tool.
EN 62841-2-2,
EN 55014-1,
EN 55014-2,
EN 60335-1,
EN 60335-2-29,
Waste electrical products must not be disposed of with
household waste. Please recycle where facilities exist.
Check with your local authorities or retailer for recycling
Battery-powered Screwdriver