Powering On/Off - Anker Soundcore Life Note Manual Del Usuario

Charging
Remove the protective film from the earbuds when using for the first time.
•
Fully charge both the earbuds and the charging case before the first-time using.
•
To prevent damage, use the provided USB-C cable.
•
Fully dry off the earbuds and the USB port before charging.
•
1
R R
LED behavior (Earbuds & Charging case)
Steady white Being Charging
Fully charged
•
Light off
Remaining battery >10% (when in use)
•

Powering On/Off

The earbuds will automatically power on when taken out of the charging case and power off
when placed back into the charging case.
ON
LED behavior (Earbuds)
Steady white for 1 second
ON
Steady red for 1 second
OFF
01 EN
2
OFF
To manually power on, press the multi-function button on either one of the earbuds.
•
To manually power off, press and hold the multi-function button on either one of the
•
earbuds for 3 seconds.
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the
charging case.
LED behavior (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
When powered off, press and hold the multi-function button on both earbuds for 1
•
second, the earbuds will enter TWS connecting mode.
When powered on and connected, place either one of the earbuds into the charging case,
•
you can keep using the other one.
When powered on and connected, if either one of the earbuds is out of battery and
•
powered off, you can keep using the other one.
When you are on a call, place either one of the earbuds into the charging case, 3 to 5
•
seconds later, the microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-up.
EN 02