Idle Mode; Programming Mode - ShenPaz Focus 4010 Manual De Instrucciones

3.3 Set-Up possibilities:
In order to enter the Diagnostic mode you have to turn the furnace on from the front
panel by pressing the ON/OFF key. Now the furnace is in the stand-by mode (the display
is showing "Focus "Logo ).
 Press menu button:


3.4

Idle Mode :

Press the [ON/OFF] key located on the front panel, the furnace is now ready for
Program selection.
POINTS TO NOTE
 Idle mode is provided for use during long time intervals, when the furnace is not in
operational use.
 It is very important that you keep the firing chamber closed to
prevent moisture from entering the muffle.
3.5

Programming mode:

Press the "PROGRAM" key [PROG].
Using the number keys enter any number from 0-249 or scroll with the arrows to the
chosen program.
Press the "ENTER" key.
POINTS TO NOTE
 When editing is required press menu button and press option 1- edit program.
- By pressing the arrow you will change to the different parameters and to update the
different value
 If you want to change your program, press the "CLEAR" key and re-enter a different
program number (0-249).
FOCUS 4010/HT Dental Porcelain Furnace
By pressing the arrows you can browse through the
options/Diagnostics/setup
By pressing number 2 you will be able to set your preference:
By pressing the arrows you can navigate between the different options
By pressing the enter button you will change your choice
Page 11 Manual version 20.08.2015