Symbols On The Trimmer; General Safety Instructions - Grizzly ERT 230 Traducción Del Manual De Instrucciones Original

GB

Symbols on the trimmer

Caution!
Read the operating instructions ca-
refully.
Wear eye and ear protection!
The cutting head will con-
tinue to rotate for a few
seconds after the equipment
has been switched off. Keep
hands and feet well away.
Do not expose the equipment to
the damp. Do not work in the rain
and do not cut wet grass.!
Remove the plug from the mains.
Immediately if the cable is dama-
ged or cut.
Keep by-standers well
away. They could be inju-
red by flung out objects.
Noise level rating
L
WA
L in dB(A)
dB
WA
Electrical appliances must not be
disposed of with the domestic wa-
ste.
Protection Class II
Cutting circle
Cutting line thickness
16

General safety instructions

Before working with the equipment,
familiarise yourself with all the op-
erating parts. Practise handling the
equipment and have the function,
mode of operation and working
techniques explained by an expe-
rienced user or an expert. Ensure
that you can switch off the equip-
ment immediately in an emergency.
Improper use of the equipment can
result in serious injuries.
Caution! When using power
tools, observe the following ba-
sic safety measures for the pre-
vention of electric shocks and
the risk of injury and fire:
Operating the trimmer
• This device can be used by
individuals with reduced physi-
cal, sensory or mental capabili-
ties or a lack of experience or
knowledge if they are super-
vised or have been instructed
in how to use the device safely
and understand the associated
dangers. Children must not
play with the device.
• Never allow children and people who
are not familiar with these Operating
Instructions to use the trimmer. Local
regulations may stipulate a minimum
age for operators.
• Keep the equipment well away from
by-standers, children and pets. Turn
off the equipment if they are in the vi-
cinity.
• The protective devices and your per-
sonal protective equipment will protect
yourself and other people and ensure
that the equipment can be smoothly
operated: