Rothenberger R550 Instrucciones De Uso página 16

that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc., in accordance with these
instructions and in the manner intended
for the particular type of power tool,
taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into power tools that have the
switch on invites accidents.
b) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
c) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
d) When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
e) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may
cause irritation or burns.
6) Service
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
8
Special Safety instructions
Only guide the spirals using the supplied special
safety gloves.
Wear rubber boots during the cleaning work
(insulation).
The spirals must be fully removed from the holding
cage before the machine is switched on.
Before plugging the power plug in the power
necessarily that is the switch of the pipe cleaning
machine to NULL or to OFF.
In principle, the use of electrical devices, the
predetermined voltage and observe generally work
with protective hose and gloves.
(The use of leather gloves with studs ¬ stocking is
absolutely important to ensure that an additional
latex disposable gloves must be used.)
Proper usage
The pipe cleaning machines may only be used to
clean pipes of the following diameters:
R550: 20-100mm
R600-650: 20-150mm
R750: 20-200mm
The pipe cleaning machines are only designed for
short term operation and may therefore only be
used for a maximum continuous period of 15
minutes.
Do not use this product in any other way as stated
for normal use.
ENGLISH