Publicidad
Day
A.
B.
1
2
3
Date
1
2
3
24 Hours
Standard Instructions
18
A. Pull the crown out to the middle position.
B.
Rotate the crown to set date.
C. Pull the crown out to the fully extended position
crown to set the desired time.
D. Push the crown back to its normal position.
The date and time are now set.
Multifunction Instructions
A. Pull the crown out to the middle position
turning counter-clockwise to set the date.
B.
Pull the crown out to the fully extended position.
clockwise cycling through hours to set day. Then set time.
C. Push the crown back to its normal position.
time and hour are now set.
Mesh Band Adjustment Instructions
A. ADJUSTING THE BAND: LIFT - SHIFT - PRESS
LIFT: place a small tool (flathead screwdriver or adjustment tool) in the slot
on the clasp. Lift the bar in the direction facing away from the straight pin
(place the tool so the handle is in the direction of the case of the watch).
Leveraging the tool against the straight pin may result in the straight pin
1
bending
. SHIFT: the adjustable buckle to the desired position (make
sure the clasp is set in one of the indentations on the back of the band)
PRESS: press the slotted clasp closed – not using the straight pin as leverage
to protect against bending
2
3
and rotate
1
2
3
Rotate
1
The date and
3
.
2
.
Publicidad
