Product Description - GCE UNISET Instrucciones Para El Uso

4 .
PERSONNEL INSTRUCTIONS AND TRAINING
The product distributor shall ensure that all users and persons handling the product are fully trained to carry out
that operation. Trainees need to be supervised by an experienced person.
safety Requirements:
•
Read this instruction before installing, or using, the product. Always follow this instruction. The product shall
only be used for the purposes described in this instruction.
•
The product must not, under any circumstances be modified by other than the manufacturer.
•
Only GCE authorised personnel can maintain the product.
•
Installation of the equipment must be only done by qualified personnel in accordance with local directions,
rules and standards.
Gas installations must only be operated by qualified personnel instructed in:
•
This operating instruction .
•
The special hazards of working with high pressure gases .
•
Health and Safety instruction in the use of safety equipment .
•
Consequential risk management of accidents and product malfunction .
Contact GCE if further information is required on GCE product training programmes.
5 .

PRODUCT DESCRIPTION

UNISET
•
Variants for oxygen and fuel gases are equipped with three function flashback arrestors (FBA).
•
Oxy/Inert variant is ready for oxygen service and can be used also for argon, nitrogen, helium carbon dioxide,
compressed air and their mixtures. Special oxygen variant as well as acetylene and propane variants contain
FBA. Fuel gas variant is designed for hydrogen, methane and natural gas.
•
There are two design types for shielding gases (Ar and Ar-mixtures). First of them consists of flow-gauge
showing flow-rate adjusted by pressure regulator. The second one is based on flow-meter with dosing valve
giving and showing exact flow-rate.
•
Components of entire range are mounted on stabile steel wall bracket ensuring fast and safety installation.
•
Special twin-variant enable connection of two welding generators at one outlet pipe. This can be used also for
combination of welding and root shielding with identical gas. Flow variant for N2/H2 and Ar/H2 with outlet
capacity of 50l/min is optimal for root shielding application.
•
UNISET SINGLE BV contains ball valves, inlet and outlet nipples, wall bracket, hose nipple + nut.
GAS PRESSURE RANGE:
Uniset single BV ODNCO2
Uniset single BV BV+FBA Oxygen
Uniset single BV + FBA Fuel gases
UNISET+
•
Excellent protection, given by the external removable steel cover.
•
All variants include inlet brazing socket for 8 mm tube and outlet hose nipple.
•
Oxygen, acetylene and fuel gas version contain also pressure gauge and outlet safety device MV93
•
Two variants available - one with flow-gauge, second with flow-meter with dosing valve.
DINSET
•
consists of inlet welding or brazing socket (acc. to gas type), inlet ball valve PN40, DIN-line regulator with
pressure gauge, flow gauge or flow-meter and hose nipple.
•
Components are mounted on V-profile steel wall bracket for safety installation.
•
Oxygen variant as well as acetylene and propane variants are prepared for optional installation of GCE
flashback arrestor FR50 due to identical outlet/inlet angle (other variants of flashback arrestors also possible
to install according to product market).
- OXY 0 - 30 bar
- DNCO2 0 - 40 bar
- OXY 0 - 15 bar
- Acetylene 0 - 1,5 bar
- Hydrogen 0 - 3,5bar
- PM 0 - 5 bar
5/76
EN