Sanus Systems VMAV Manual Del Usuario página 4

Step 2: Add Cover
Slide the Cover (b) so it clips onto the Wall Plate
(a). See Diagram 2 for assistance.
Step 3: Add Feet and Caps
Press fit a Foot (e) into each of the 4 holes in the top
portion of the Tube (c). Press fit a Cap (d) into each
end of the Tube. See Diagram 3 For assistance.
Step 4: Install Tube
Insert the Tube (c) into the Wall Plate (a). Insert a
Set Screw (g) into each hole in the Wall Plate as
shown in the Detailed View of Diagram 4. Tighten
each Set Screw firmly with the Allen Key (h).
Diagram 4
b
e
c
d
c
Diagram 2
a
Diagram 3
Detailed View
g
a