Publicidad
Idiomas disponibles
Idiomas disponibles
P1D-S Declaration of Conformity
P1D-S Declaration of Conformity
P1D-S Declaration of Conformity
According to ATEX 94/9/EC
According to ATEX 94/9/EC
P1D-S Declaration of Incorporation
P1D-S Declaration of Incorporation
According to ATEX 94/9/EC
P1D-S Declaration of Incorporation
According to EC Machinery Directive 2006/42/EC
According to EC Machinery Directive 2006/42/EC
P1D-S Declaration of Conformity
According to EC Machinery Directive 2006/42/EC
According to ATEX 94/9/EC
P1D-S Declaration of Incorporation
We
We
According to EC Machinery Directive 2006/42/EC
Parker Hannifin Manufacturing
Parker Hannifin Manufacturing
Germany GmbH & Co. KG
Germany GmbH & Co. KG
We
Parker Hannifin Manufacturing
Pneumatic Division Europe
Pneumatic Division Europe
Germany GmbH & Co. KG
Industriestrasse 8
Industriestrasse 8
Pneumatic Division Europe
We
Parker Hannifin Manufacturing
70794 Filderstadt Germany
70794 Filderstadt Germany
Industriestrasse 8
Germany GmbH & Co. KG
70794 Filderstadt Germany
Pneumatic Division Europe
Declare that the following pneumatic cylinders have been assessed in accordance with ATEX 94/9/EC (Products for
Declare that the following pneumatic cylinders have been assessed in accordance with ATEX 94/9/EC (Products for
Industriestrasse 8
use in potentially explosive atmospheres). ISO15552 Cylinders P1D-S***MS-**** range are compatible for the use in
use in potentially explosive atmospheres). ISO15552 Cylinders P1D-S***MS-**** range are compatible for the use in
Declare that the following pneumatic cylinders have been assessed in accordance with ATEX 94/9/EC (Products for
70794 Filderstadt Germany
explosive atmosphere Ex II 2 GD c T4 (T120°C).
explosive atmosphere Ex II 2 GD c T4 (T120°C).
use in potentially explosive atmospheres). ISO15552 Cylinders P1D-S***MS-**** range are compatible for the use in
explosive atmosphere Ex II 2 GD c T4 (T120°C).
Declare that the following pneumatic cylinders have been assessed in accordance with ATEX 94/9/EC (Products for
P1D-S is designed for utilization in applications falling under the scope of the ATEX 94/9/EC. This product is designed
P1D-S is designed for utilization in applications falling under the scope of the ATEX 94/9/EC. This product is designed
use in potentially explosive atmospheres). ISO15552 Cylinders P1D-S***MS-**** range are compatible for the use in
and manufactured in compliance with following elements:
and manufactured in compliance with following elements:
P1D-S is designed for utilization in applications falling under the scope of the ATEX 94/9/EC. This product is designed
explosive atmosphere Ex II 2 GD c T4 (T120°C).
and manufactured in compliance with following elements:
EN 1127-1:2007 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and
EN 1127-1:2007 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and
P1D-S is designed for utilization in applications falling under the scope of the ATEX 94/9/EC. This product is designed
methodology
methodology
EN 1127-1:2007 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and
and manufactured in compliance with following elements:
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method
methodology
and requirements
and requirements
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method
EN 1127-1:2007 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection
and requirements
methodology
by constructional safety ´c´
by constructional safety ´c´
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method
EN 983+A1:2008 Safety of machinery – Safety requirements for fluid power systems and their components -
EN 983+A1:2008 Safety of machinery – Safety requirements for fluid power systems and their components -
by constructional safety ´c´
and requirements
Pneumatics
Pneumatics
EN 983+A1:2008 Safety of machinery – Safety requirements for fluid power systems and their components -
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection
As manufacturer of the partly completed machine we declare that:
As manufacturer of the partly completed machine we declare that:
Pneumatics
by constructional safety ´c´
As manufacturer of the partly completed machine we declare that:
EN 983+A1:2008 Safety of machinery – Safety requirements for fluid power systems and their components -
The specified cylinders correspond to the listed essential requirements of the EC Machinery Directive
The specified cylinders correspond to the listed essential requirements of the EC Machinery Directive
Pneumatics
2006/42/EC
2006/42/EC
The specified cylinders correspond to the listed essential requirements of the EC Machinery Directive
As manufacturer of the partly completed machine we declare that:
The relevant technical documentation is complied in accordance with part B of Annex VII
The relevant technical documentation is complied in accordance with part B of Annex VII
2006/42/EC
The relevant technical documentation in accordance with part B of Annex VII will be transmitted in response to
The relevant technical documentation in accordance with part B of Annex VII will be transmitted in response to
The relevant technical documentation is complied in accordance with part B of Annex VII
The specified cylinders correspond to the listed essential requirements of the EC Machinery Directive
a reasonable request by the national authorities
a reasonable request by the national authorities
The relevant technical documentation in accordance with part B of Annex VII will be transmitted in response to
2006/42/EC
a reasonable request by the national authorities
The relevant technical documentation is complied in accordance with part B of Annex VII
Product: Pneumatic Air motor P1D-S series
Product: Pneumatic Air motor P1D-S series
The relevant technical documentation in accordance with part B of Annex VII will be transmitted in response to
Directives
Directives
Product: Pneumatic Air motor P1D-S series
a reasonable request by the national authorities
Directives
2006/42/EC
2006/42/EC
Product: Pneumatic Air motor P1D-S series
2006/42/EC
Directives
Standards
Standards
DIN EN ISO 12100
DIN EN ISO 12100
Standards
2006/42/EC
DIN EN ISO 12100
This partly completed machinery must not be put into service until the final machinery into which it is to be
This partly completed machinery must not be put into service until the final machinery into which it is to be
Standards
incorporates has been declared in conformity with the provisions of the Directive 2006/42/EG, were appropriated.
incorporates has been declared in conformity with the provisions of the Directive 2006/42/EG, were appropriated.
This partly completed machinery must not be put into service until the final machinery into which it is to be
DIN EN ISO 12100
incorporates has been declared in conformity with the provisions of the Directive 2006/42/EG, were appropriated.
This partly completed machinery must not be put into service until the final machinery into which it is to be
incorporates has been declared in conformity with the provisions of the Directive 2006/42/EG, were appropriated.
9127007796-P1D-S Annexe
9127007796-P1D-S Annexe
9127007796-P1D-S Annexe
9127007796-P1D-S Annexe
Date
Date
Date
2006-06
2006-06
2006-06
Date
Date
Date
2011-03
2011-03
Date
2006-06
2011-03
Date
2011-03
P1D-S032MS-****, all strokes
P1D-S032MS-****, all strokes
P1D-S040MS-****, all strokes
P1D-S040MS-****, all strokes
P1D-S032MS-****, all strokes
P1D-S050MS-****, all strokes
P1D-S050MS-****, all strokes
P1D-S040MS-****, all strokes
P1D-S063MS-****, all strokes
P1D-S063MS-****, all strokes
P1D-S050MS-****, all strokes
P1D-S032MS-****, all strokes
P1D-S080MS-****, all strokes
P1D-S080MS-****, all strokes
P1D-S063MS-****, all strokes
P1D-S040MS-****, all strokes
P1D-S100MS-****, all strokes
P1D-S100MS-****, all strokes
P1D-S080MS-****, all strokes
P1D-S050MS-****, all strokes
P1D-S125MS-****, all strokes
P1D-S125MS-****, all strokes
P1D-S100MS-****, all strokes
P1D-S063MS-****, all strokes
P1D-S125MS-****, all strokes
P1D-S080MS-****, all strokes
P1D-S100MS-****, all strokes
Filderstadt, Germany October 2014
Filderstadt, Germany October 2014
P1D-S125MS-****, all strokes
Filderstadt, Germany October 2014
_________________________
Filderstadt, Germany October 2014
Ing. Franck Roussillon
European Product Manager
Actuators Business Unit, Pneumatic Division Europe
Applied and fulfilled essential
Applied and fulfilled essential
requirements
requirements
Applied and fulfilled essential
1.1.2, 1.1.5, 1.3.4, 1.5.3, 1.7.3, 1.7.4
1.1.2, 1.1.5, 1.3.4, 1.5.3, 1.7.3, 1.7.4
requirements
1.1.2, 1.1.5, 1.3.4, 1.5.3, 1.7.3, 1.7.4
Applied and fulfilled essential
Remark
Remark
requirements
Partly fulfilled
Partly fulfilled
Remark
1.1.2, 1.1.5, 1.3.4, 1.5.3, 1.7.3, 1.7.4
Partly fulfilled
Remark
Partly fulfilled
_________________________
Ing. Franck Roussillon
_________________________
European Product Manager
Ing. Franck Roussillon
Actuators Business Unit, Pneumatic Division Europe
European Product Manager
_________________________
Actuators Business Unit, Pneumatic Division Europe
Ing. Franck Roussillon
European Product Manager
Actuators Business Unit, Pneumatic Division Europe
14
Additional Information
Additional Information
This coverage could only be referred to as
This coverage could only be referred to as
Additional Information
long as operations needed for final
long as operations needed for final
This coverage could only be referred to as
assembling and starting up of theses
assembling and starting up of theses
long as operations needed for final
products comply with standards relating to
products comply with standards relating to
assembling and starting up of theses
Additional Information
the above mentioned directive. Each time
the above mentioned directive. Each time
products comply with standards relating to
This coverage could only be referred to as
this will be required for compliance purpose,
this will be required for compliance purpose,
the above mentioned directive. Each time
long as operations needed for final
the user will have to apply for a complete
the user will have to apply for a complete
this will be required for compliance purpose,
assembling and starting up of theses
coverage of the final assembled system
coverage of the final assembled system
the user will have to apply for a complete
products comply with standards relating to
according to the above mentioned directive
according to the above mentioned directive
coverage of the final assembled system
the above mentioned directive. Each time
and relating standards
and relating standards
according to the above mentioned directive
this will be required for compliance purpose,
and relating standards
the user will have to apply for a complete
coverage of the final assembled system
according to the above mentioned directive
and relating standards
Publicidad
