Install The Battery - Hach 2100Q Instrucciones Para El Usuario

printer, USB-Barcode scanner and computer. The module firmware can
be updated with a file downloaded from the computer.
Power module components
N O T I C E
The manufacturer recommends to use only the supplied power supply (LZV803).
Refer to Figure 1 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
Figure 1 Power module components
1 Power module
USB+Power module components
N O T I C E
The manufacturer recommends to use only the supplied power supply (LZV803).
Refer to Figure 2 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
4 English
2 AC adapter plugs (EU/USA/UK/
AUSTRALIA) and AC-DC power
supply
Figure 2 USB+Power module components
1 USB cable, type A plug to USB mini
B plug
2 USB cable, type A receptacle to USB
mini B plug
Installation

Install the battery

W A R N I N G
Potential fire hazard. Use only alkaline or nickel metal hydride batteries (NiMH) in
the meter. Other battery types or incorrect installation can cause a fire. Never mix
battery types in the meter.
N O T I C E
The battery compartment is not waterproof. If the battery compartment becomes
wet, remove and dry the batteries and thoroughly dry the interior of the
compartment. Check the battery contacts for corrosion and clean them if
necessary.
3 USB+Power module
4 AC adapter plugs (EU/USA/UK/
AUSTRALIA) and AC-DC power
supply