Product Information; Technical Data; English - Pahlen LED 170VS Manual

LED unit 170VS
It is important to carefully read through this manual to secure the poll equipment's function and service life.
Pahlén AB is not liable for product warranty or damage as a result of improper installation, wrong usage or incorrect maintenance.

Product Information

Lighting input for niche mounting under water in different types of frames for swimming pools. It fits all Pahléns lighting Type 170
A and CA, both Classic and Marine design.
Note! The lamps should only be used under water.
The RGB lamp is an advanced electronically controlled light based on LEDs in the three colours, red, green and blue.
These three colours together can create many other ones. With the help of the on/off switch, it is possible to select one of the 11
different pre-programmed light effects.
The lamp can be used with a control unit (sold separately): PLP REM or PLP REM 300.

Technical data

Power:
Colour Temperature:
Light Flow:
Voltage:
Lamp's enclosure class:
Maximum water temperature:
Dimmable (with a control unit):
Installation
The niche shall be mounted in the frame according to the MA50-11 instructions. Power shall be turned off.
1. The lighting element's cable shall be mounted on the LED module, see section "Install the LED module's cable like this" in this
manual.
2. The supplied sleeve should be placed on the lighting element's cable.
3. Thread the lighting element's cable into the cable pipe. Position the sleeve (3) at the niche's cable fitting. Then tighten the
screw fitting on the lamp niche to seal the cable.
4. The excess cable wraps behind the light and then the lighting element is screwed in the niche.
5. Connect the cable to the connection unit.
6. Install the front ring.
Replacement lamps:
1. Power shall be turned off.
2. Loosen the existing front and lighting element.
3. Unclip the old lamp from the lighting element mounting frame.
4. See items 3 to 7 above
Typ CA
Pool frame dressed
in liner
2
4
5
Installation LED Moonlight
WW
18W
5000K
1400 lm
10 – 14V AC 50/60Hz
IP68 (measure at 3m)
+40˚C
No
6
7
Surface treatment Designed by:
E
The tolerance class in accordance with this Assembly drawing no.
part of ISO 2768-1
Installationsbild
belysning typ 300CA LED
för pool med duk
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
RGB
34,5W
—
2100 lm
10 – 14V AC 50/60Hz
IP68 (measure at 3m)
+40˚C
No
Typ A
Concrete pool frame
dressed in tile/mosaic
2
4
5
Drawn by: Date Approved by:
TS 2011-11-30
Art.no. 7
Scale Revised by: Date
Drawing number Rev.no.
M11604 0

ENGLISH

1. Niche
2. Light Element
3. Gasket Sleeve
4. Screw M5x20 (2x) type A
Screw M5x50 (2x) type CA
5. Front
6. Countersunk screw M5x10 (4 pc)
REV
7. Nylon plate (6x)
3
1. Niche type A
E
3
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
6
1. Niche type CA
7
Surface treatment
E
The tolerance class in accordance with this
part of ISO 2768-1
Installationsbild
belysning typ 300A LED
för betongpool
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
DESCRIPTION DATE APP
1 2018-10-22
Designed by: Drawn by: Date Appr
Surface treatment
ASA 2018-10-22
The tolerance class in accordance with this Assembly drawing no. Art.no.
part of ISO 2768
Scale Sheet size Revi
A3
Drawing number
Nisch med tätni
Designed by: Drawn by: Date Approved by:
ASA 2011-12-01
Assembly drawing no. Art.no.
Scale Revised by: Date
TS 2012-0
Drawing number Rev.n
M11605 1