No Sensor; Spare And Wearing Parts; Decommissioning; 19 6.1 Temporary Shutdown - Bosch BEA 060 Manual Del Usuario

en | 26 | BEA 060 | Decommissioning
5.4.7

NO sensor

Over the course of time, the NO sensor is subject
to wear. The zero point of the NO measurement is
constantly monitored. In the event of deviation, a fault
message appears. The message indicates the need for
NO sensor replacement.
!
Always use the genuine NO sensor (NOXO 100 Nitric
Oxide Sensor; order number 1 687 224 954).
The NO sensor contains acid.
Acids cause severe burns on bare skin.
¶
Do not open or damage the O2 sensor.
¶
Wear safety goggles.
¶
Wear protective gloves.
¶
Immediately rinse any areas of skin
affected with water at least 15 minutes
and then consult a doctor.
!
Old NO sensors are classed as hazardous waste
and must be disposed of in accordance with the
applicable regulations. The disposal code is
16 05 02 (European waste catalog: EAK code).
In addition, these parts can be sent back to the
manufacturer for disposal.
5.5

Spare and wearing parts

Designation
BEA 060
O sensor
<)
2
NO sensor
<)
Coarse filter
<)
Activated charcoal filter
<)
Hose for BEA 060 and
exhaust gas sampling probe (gasoline)
Leak test hose
<)
USB connecting cable (5 m)
<)
Power cord (4 m)
<)
Bluetooth USB adapter
Wearing part
<)
|
1 689 989 182 2020-06-24
6.
6.1
In the event of lengthy periods of non-use:
¶
6.2
¶
¶
¶
¶
6.3
1. Disconnect the BEA 060 from the mains and detach
2. Dismantle the BEA 060 and sort out and dispose
Only for EC countries:
Order number
1 687 023 613
1 687 224 727
1 687 224 954
1 687 432 005
1 687 432 014
1 680 706 043
1 680 790 049
<)
1 680 706 040
1 684 465 563
1 684 461 182
1 687 023 777

Decommissioning

Temporary shutdown
Disconnect the BEA 060 from the mains.
Change of location
If the BEA 060 is passed on, all the documentation
included in the scope of delivery must be handed
over together with the unit.
The BEA 060 is only ever to be transported in the
original or equivalent packaging.
Unplug the electrical connection.
Heed the notes on initial commissioning.
Disposal and scrapping
the power cord.
of the different materials in accordance with the
applicable regulations.
BEA 060, accessories and packaging should be
sorted for environmental-friendly recycling.
¶
Do not dispose BEA 060 into household
waste.
The BEA 060 is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of BEA 060 prevents
environmental pollution and possible
health hazards.
Robert Bosch GmbH