Kohler K-4737 Guia De Instalacion página 6

4. Install the Seat
For All Installations
Slide the seat onto the mounting plate until you feel it snap into
place. Verify the seat is properly aligned.
NOTE: Threaded insert alignment: Remove the seat by pressing in
the release button and sliding the seat forward. Reposition the
mounting plate and seat, then reinstall the seat. Repeat this
procedure until the seat is properly aligned.
NOTE: All other alignment: With the seat still on the toilet, loosen
the nuts on the underside of the toilet. Reposition the seat, then
retighten the nuts. If the nuts cannot be loosened or tightened, it is
likely that the washers are in positioned incorrectly, allowing the
bolt to spin. Refer to the "Install Mounting Plate" section for proper
positioning of the washer.
For Toilets with Threaded Inserts
Remove the seat.
Using a flat-blade screwdriver, tighten the bolts to secure the
mounting plate.
Reinstall the seat.
For All Other Installations
Using an adjustable wrench, fully tighten the nuts.
1097712-2-A
Mounting Plate
Release Button
6 Kohler Co.