Figure 3-6 Hi Precision Sensor Label - Siemens SITRANS F FUG1010 IP65 NEMA 4X Instrucciones De Operación

Connecting
3.4 Programming the Transmitter
Typical Sensor Label
①
②
Figure 3-6
Selecting Sensor
The following is a typical example of sensor selection.
Note
The transmitter must be powered up before you can select a sensor model. Refer to
Transmitter Wiring (Page 19).
1. Press <Left Arrow> to return to Main Menu. At the [Meter Type], press the <Right Arrow>
and then <ENTER>.
2. The [Chan/Path Setup] menu will appear.
3. Press the <Down Arrow> to select the [Install Sensor] menu.
4. Press the <Right Arrow> to [Sensor Model]. Press <Right Arrow> and scroll to select the
sensor model number on the sensor label
36
Hi Precision sensor model number
Sensor size
Hi Precision Sensor Label
FUG1010 IP65 NEMA 4X Quick Start
Operating Instructions, 06/2014, A5E02951527-AC