Voice Commands - BlueAnt T2 ENDURE Manual Del Usuario

5
Once the pairing is complete, your headset will attempt to transfer
your phonebook contacts so that it can announce the names of
incoming callers. Please accept any connection requests on your
phone from the T2 and wait for the transfer to fi nish.
Some phones do not support automatic phonebook transfers. If the
T2 announces that this is the case, you need to go to your phone's
address book and send contacts via Bluetooth to the T2.
See "Phonebook Troubleshooting" or
for help.
Note:
update your phonebook on the T2: with the T2 connected to your
phone but not on a call, hold down the
seconds to initiate a phonebook update.
6
de and
To use one of the voice commands, click the
cted to any
for the T2 to ask you to
ll
> Check Battery
> Phone Commands
T2_User_Guide_EN.indd 5
Transfer Your Phonebook
Whenever you add contacts to your phone in future you must

Voice Commands

Say A
— Tells you the current headset battery level.
— Activates your phone's voice dialing feature (if
www.blueantwireless.com
Command
Command
Command, then say the command:
button for 3
button, wait
2/2/2012 7:19:42 PM