Hisense HGO601BS Manual De Funcionamiento Para El Usuario página 14

CONNECT THE GAS TUBE
Follow below steps to connect elbow,
1. Put 1 gasket into the elbow (gasket and elbow are included in package)
2. Tighten the step 1 component on the gas inlet tube.
MUST check gas leakage before use the oven.
⚫ USE special gas leakage tester to check the joint between the elbow and the gas inlet
tube .
⚫ OR Apply soapy water to the joint between the elbow and the gas inlet tube to check gas
leakage. If there are bubbles, it's leakage, must tighten the elbow again. Then recheck it.
NOTE: NEVER USE THE PRODUCT IF THERE ARE BUBBLES.
- 14 -