Equipotential Bonding; Installation Of Floating Washing Machines (Groups A-D-E); Removal Of Packaging - Domus DHS-11 Instrucciones Generales Para Instalación

6.8. Equipotential Bonding:

In addition to the equipment-grounding conductor discussed earlier that runs with the circuit conductor's and is
connected to the equipment grounding terminal, all washers or appliances in the vicinity must be permanently
interconnected with a grounded connector.
The external connection points marked on the back of the washer serve for this purpose. See illustration below.
The cross-sectional area of the conductor must be at least electrically equivalent to the cross-sectional area of
the copper conductor used to power the washer.
1. Protective grounding structure
2. External protective conductor connection point
3. Protective interconnecting conductor
4. Grounding identification

7. INSTALLATION OF FLOATING WASHING MACHINES (GROUPS A-D-E)

7.1. Removal of packaging

Remove the cover and wooden side protectors together with the plastic protector covering the appliance.
After unpacking the washing machine, the pieces that secure the floating part and the chassis during
transportation should be removed.
In order to do this, the side panels and skirting must be removed to access the fastening elements. They are
easily seen as they are red.
7