TECHNICAL
CHARACTERISTICS
Voltage ..................................See data plate
Motor power .....................................1050 W
Sound level ....................................61 dB(A)
Depression ............................... 210 mmH
Paper bag capacity .................................. 5 l
Dimensions ...............350 x 350 x 430H mm
Weight ................................................... 6 kg
Accessories ................................... Ø 32 mm
TYPE OF USE
Use this appliance only as a dry vacuum
cleaner to suck up dust, crumbs etc.
It has only been designed for this use.
DANGER:
The manufacturer can not be held respon-
sible for any damage due to improper or
incorrect use.
Any other use releases the manufacturer
from liability for harm to persons and/or
property and invalidates any warranty
condition.
IMPROPER USE
Do not use the appliance to:
-
Aspirate any type of liquid;
-
Aspirate flammable, explosive, corrosive
and toxic substances.
-
Aspirate hot substances.
Do not use the appliance in areas at risk of
explosion.
PREPARING
THE APPLIANCE
Checking the filter systems
-
Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with the mo-
tor unit.
-
Remove the polyester (3 Fig. 2) filter (if
any)
-
Check that the paper bag (4 Fig. 3) is in
place inside the appliance.
-
If the paper bag (4 Fig.3) is not present,
mount it by inserting the hole (5 Fig. 3)
with the gasket into the nozzle (6 Fig. 3)
O
2
until the bag rests up against the drum
wall.
-
Place the cover back on and lock it using
the levers (1 Fig. 1).
Assembling the pipes
-
Insert, as far as possible, the sleeve (7
Fig. 4) of the suction hose into the nozzle
(8 Fig. 4) on the drum.
-
To release the sleeve (7 Fig. 5) press and
hold down the button (9 Fig. 5) and then
pull the sleeve outwards (7 Fig. 5).
-
Attach the extension (11 Fig. 6) to the er-
gonomic handle (10 Fig. 6).
-
Attach the required accessory (suction
nozzle, dusting brush, crevice tool, multi-
purpose brush etc.) to the extension (11
Fig. 7).
Multi-purpose brush
(if present)
The multi-purpose brush should be used as
follows:
-
To clean hard floors, parquet etc.: press
the lever (12 Fig. 8) back to extract the
brush bristles.
-
To vacuum on carpets, rugs etc.: press
the lever (12 Fig. 8) forward to retract the
brush bristles.
Auxiliary power brush connection
The appliance is equipped with an auxiliary
power brush connection (optional).
-
Lift up the flap (13 Fig. 6) to access the
socket (14 Fig. 9).
EN - 1
EN