Populo CIDL-2003 Manual De Usuario página 10

OPERATION
MAINTENANCE
Note:
unauthorized person.
Battery Protection System
The output power automatically cuts off if the tool and/or battery gets overload or when the remaining battery capacity becomes low.
Note:
The battery protection system does not in any way damage the tool.
The indicated capacity may be lower than the actual level during use or immediately after using the tool.
TROUBLESHOOTING
LED lights do not illuminate on charger
Check the charging adaptor is securely plugged into the wall outlet.
Check the battery is firmly connected to the charging base.
The battery has a short runtime
Variable speed trigger is locked
The impact driver is stripping the screw head
head. Decrease the force by using a slower tigger speed.
Impact driver has cut out during use
The battery capacity could be completely depleted. Place the battery pack on the charger for recharge.
The impact driver may have been overloaded and the over current protection system stopped the driver. Reduce hand pressure to continue
operation.
Sparking visible through the housing air vents