Populo CIDL-2003 Manual De Usuario página 6

UNPACK AND SET-UP
BATTERY PACK AND CHARGING
CAUTION:
(rated at 30mA or less).
discharging (through use of the tool) for the battery to reach its optimum performance/runtime.
Charging Your Lithium-ion Battery
adaptor into a mains power
outlet.
2. The charger LED will
illuminate green showing power
is being supplied to the
charger.
raised ribs on the battery with
the recess in the charging base
and slide onto the battery
ensuring a firm connection.
4. The charger LED will
illuminate red signifying that the
battery is charging.
press the battery release
base from its position.
Charger LED Indicator (on the charging base)
LED Indicator
Stand by (no battery pack is inserted)
Battery is charging (low charge)
RED (illuminated)
Battery is fully charged
Battery or charger fault (If charging a
LED indicator could not turn from
green to red.)
NOTE: The battery needs to be removed from the tool to check
the state of charge.
The charger for this product should be protected by a leakage current device
Situation
Battery Gauge Indicator
The purchased battery is
indicator to show the charged
state of the battery. Press the
indicator button and look to see
which LED illuminate.
charging.