Populo CIDL-2003 Manual De Usuario página 9

OPERATION (CONT.)
DRIVING PROCEDURE
1. Depress and release the
variable speed trigger to ensure
it is not locked.
2. Check whether the
forward/reverse lever is on the
desired setting.
3. Ensure the material to be
drived in a vice or clamp to
prevent it from moving whilst
driving.
NOTE: Do not force the driver or apply side pressure to elongate the hole. Let the impact driver do all the work. Remember to always
firmly grip the impact driver while driving.
4. Hold the driver firmly against
the fastener to stop it slipping.
speed trigger to start the driver.
on trigger with appropriate
tightened.