Installing/Removing Battery Pack - Populo CIDL-2003 Manual De Usuario

UNPACK AND SET-UP (CONT.)

INSTALLING/REMOVING BATTERY PACK

Installing the Battery Pack
Slide the battery pack into the
impact driver base until it clicks
into place.
NOTICE:
ASSEMBLY
WARNING!
any of the following tasks.
Inserting & Removing Accessories
1. Pull the drive retaining ring
forward.
"
appropriate (1/4 ) driving nut.
The way of inserting/removing of driving bits is the same as that of driving nuts above.
CAUTION:
Ensure the tool is switched off and the battery is removed before performing
Removing the Battery Pack
1. Hold down the battery
pack and release button.
2. Slide the battery pack
out.
3. Release the drive bit retaining
ring then pull on the driving nut to
ensure it is firmly in place.
ring forward & remove the driving
nut.
a
b
a
b