Extra Control Cables
DSS-S2-DDA-l/h-FCM-PE1-PEFDS-JPN-P5050
B
Both relay output and analog output (DDA, DMH AR)
R
Relay output
A
Analog output (DDA, DMH AR)
S
Remote stop (DME)
T
Both relay output and Remote stop (DME)
N
Analog/pulse input only, or none for B variant pumps
Piping Material
DSS-S2-DDA-l/h-FCM-PE1-PEFDS-JPN-P5050
P
PVC
C
CPVC
F
PVDF
S
Stainless Steel
Suction Pipe Size
DSS-S2-DDA-l/h-FCM-PE1-PEFDS-JPN-P5050
50
1/2"
75
3/4"
10
1"
15
1-1/2"
20
2"
Discharge Pipe Size
DSS-S2-DDA-l/h-FCM-PE1-PEFDS-JPN-P5050
50
1/2"
75
3/4"
10
1"
15
1-1/2"
20
2"
3. Safety information
Non-observance of the safety instructions may have dangerous
consequences for the staff, the environment and the product and
may result in the loss of any claims for damages.
Should you require further information, please contact Grundfos.
3.1 Target group
These installation and operating instructions contain general
instructions that must be observed during installation, startup,
operation and maintenance of the product. The responsible staff
must read these installation and operating instructions prior to
any work at the product. These installation and operating
instructions must be available at the installation site at all times.
3.1.1 Qualification and training of staff
The staff responsible for the installation, startup, operation and
maintenance must be qualified for these tasks. Areas of
responsibility, levels of authority and the supervision of the staff
must be precisely defined by the operating company. If
necessary, the staff must be trained.
3.1.2 Obligations of the operating company
•
Observe the local safety regulations.
•
Instruct the operating staff.
•
Provide the stipulated safety equipment and personal
protective equipment.
•
Arrange regular maintenance.
3.1.3 Obligations of the user
•
Read this manual thoroughly before putting the product into
operation.
•
Observe the recognized health and safety regulations as well
as the accident prevention regulations.
•
Wear protective equipment in accordance with national health
and safety regulations when working at the system and
handling chemicals.
3.2 Symbols used in this document
Warning
If these safety instructions are not observed, it may
result in personal injury.
If these safety instructions are not observed, it may
Caution
result in malfunction or damage to the equipment.
Notes or instructions that make the job easier and
Note
Note
ensure safe operation.
5