Cleaning & Storage - Veridian Healthcare JXB-311 Manual De Instrucciones

CLEANING & STORAGE
The lens should be cleaned before and after each use, to eliminate
dirt and fingerprints and ensure the accuracy of your readings. Proper
storage will prevent degradation and damage to the unit.
CLEANING:
• An alcohol swab, or a soft cotton cloth
moistened with 95% alcohol, should be used
to gently cleanse the lens. Do not use water to
wash the thermometer.
• The body of the thermometer can be cleaned
with a soft, dry cloth.
• Never use a paper towel to clean the probe tip,
as it may scratch the lens.
• Do not immerse the thermometer or allow
liquid to enter the casing.
• Do not use cleaning agents other than alcohol
to clean the thermometer; abrasives, thinners
or gasoline will damage the unit.
• Do not use the thermometer again until it is
completely dry and allowed to remain untouched for at least 30
minutes.
STORAGE:
• Store the unit in an area away from sunlight, dust and humidity.
• Protect the thermometer from mechanical shock or heavy impact.
• Avoid extended exposure to extreme temperatures. The
thermometer should be stored in an environment between -4°F
and 131°F (-20°C—55°C), and with relative humidity of 95% or
lower.
• Remove the batteries during extended storage.
ENGLISH • 15