Levolor Real Wood & Faux Wood Blinds Instalación página 11

INSIDE MOUNT (IM)
STEP 3: INSTALLING THE BLIND
•
Align the headrail with the brackets, tilt mechanism facing out.
•
Slide the headrail straight back into the brackets.
•
If the headrail can slide from side to side in the box brackets, use a flat-head
screwdriver to bend out the tabs on the ends of the headrail until it is snug.
•
If center support bracket(s) are included, hook the front edge of the headrail
into the channel on the bracket.
•
Lower the front of each box bracket and press until the locking tab clicks
into place.
CAUTION: Be sure the bracket and headrail are properly secured before
!
operating the blind. Failure to do so may result in the blind falling and
possible injury.
INSTALLATION
Corded & Cordless Operation
11