Extension Brackets; Spacer Blocks; Hold-Down Brackets; Tilt Wand - Levolor Real Wood & Faux Wood Blinds Instalación

INSTALLING ADDITIONAL COMPONENTS
EXTENSION BRACKETS (optional)
•
Optional extension brackets offers clearance
for obstructions.
•
Outside mounting extension brackets will
provide 2–4" clearance between the headrail
and mounting surface. Assemble extension
bracket as shown.
•
Secure an extension bracket to each standard
mounting bracket.
SPACER BLOCKS (optional)
•
Outside mounting spacer blocks will provide
an additional ⁄
3
•
If spacers are used, longer screws may
be required to ensure a secure installation
(not provided).
! CAUTION: Do not use more than one spacer block. Using more than one
spacer block could cause blind to fall resulting in possible injury.
HOLD-DOWN BRACKETS (optional)
•
Ideal for doors, hold-down brackets prevent blind from swaying. Assemble as
shown to each side of bottom rail.
Hold-down
pin
TILT WAND (on some styles)
•
Pull up the sleeve on the tilt mechanism
•
Clip the end of the wand onto the tilt
mechanism and pull down the sleeve
on the tilt mechanism
•
Rotate the tilt wand in each direction to
ensure proper operation.
16
Corded & Cordless Operation
" clearance as shown.
8
Starter hole
Inside Mount
Sleeve
Tilt
Mechanism
Outside Mount

Tilt Wand