Horizon Global 37132 Instrucciones De Instalación página 5

5. Raise hitch into position and insert (items 1 & 2) on driver's side, and
(item 4 & 5) on passenger's side. Insert bolts through the bracket and frame
as shown in Figure 1 for support. Note: The bumper locator pin may
interfere with the hitch hardware. If necessary, use an angle grinder to trim
the locator pin at the shoulder to allow proper hardware clearance.
7. Install remaining conical washers and hex nut onto matching bolts.
©2020 Horizon Global™ Corp - Printed in Mexico
6. Insert M10 bolts (item 8 & 7) through bracket and into the frame as shown in
Figure 1 (Hand tighten).
8. Tighten M10 CL10.9 fasteners with torque wrench to 40 Lb.-Ft. (54 N*M),
both 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M) and M12
GR 8.8 fasteners with torque wrench to 68 Lb.-Ft. (92 N*M).
Sheet 5 of 18 37132NP 6-22-20 Rev. A